Is Load sharing will work on router



  • Hi all,

    Please help me out with WX-590
    I had device to device setup and i m using 1 side WX590 and WX3400 on another side,both side throughput is 45 Mbps and license is unlimited.
    But the WAN link i m using right now is 30 Mbps which is connected to the router on both end, and after both side WX devices.
    "Now i m using QoS set at 30 Mbps as per link capacity.

    • as Juniper recommendation link capacity should be greater then or Equal to throughput licence.
    • the question is can i use, 1 more link on the router and enable load sharing
    • with help of that now i can have 2 WAN Link 1 is 30 Mbps capacity and 2nd link is also 30 Mbps (means Equal of both link is 60 Mbps on the router).
    • and also configured on router if traffic comes for WX so send by both Links.
    • will this work for WX to send data on both link considering as only 1 60 Mbps link.
    • Is there any portability that load will work for this segment.

    any help will appreciated……

    Santosh Singh
    India, Mumbai.

    • please help me out of this will this scenario works for WX devices.

 

37
Online

38.4k
Users

12.7k
Topics

44.5k
Posts