ISG 2000 and VLANs



  • I have a ISG2000 6.2.0r12 with 4 ethernet, aggregate in pair. I need to connect an aggregate interface to a switch which has the support for 802.1Q, where there are configured 2 VLANs.
    Can I set a tag vlan on principal aggregate interface? I tried to see with NSM and with CLI, but I can’t do it.
    So I create two sub interface where I can set the tag vlan. On sub interfaces I set the IP address but in the principal interface it is blank.
    I can’t do tests actually. So I don’t know if my configuration is good.
    Someone has suggestions for me? Sorry if informations are few.

    Thank you



  • Today I tested my configuration and works.


 

44
Online

38.4k
Users

12.7k
Topics

44.5k
Posts