Public IP address destination to different private IP's
Andyfowles last edited by
I hope someone can help with something which should be simple but with which I am having problems.
I need to forward one public IP address to two different private IP’s based on the port destination in order to use my SIP trunks. The public IP address I will use for SIP is NOT the same as eth0/0 (untrust) on my SSG5.
Let’s say the Sip Trunk (port 5060) needs to be forwarded to 192.168.2.1 and a range of ports (10200 - 10275) need to be forwarded to 192.168.2.2 can someone explain how to set this up in simple terms using the SSG5 GUI?
Many thanks in advance.
ask4u1234 last edited by
Yes, we can achieve with the help of VIP that you are looking for.
You can refer following link http://kb.juniper.net/InfoCenter/index?page=content&id=KB6257&actp=RSS
Please let me know if it helps.