Subscriber management pppoe server on juniper mx 240



  • hello,

    i have juniper mx 240 acting as pppoe bras server. i have some configuration problem while configuring dynamic profile.

    here is my configuration:
    dynamic-profiles {
        wlink {
            interfaces {
                pp0 {
                    unit 0 {
                        ppp-options {
                            chap;
                            pap;
                        }
                        pppoe-options {
                            underlying-interface pp0;
                            server;
                        }
                        family inet {
                            unnumbered-address lo0 destination-profile test;
                        }
                    }
                }
            }
        }
    }

    interfaces {                           
        ge-1/1/1 {                         
            description PPPOE_TEST;       
            unit 0 {                       
                encapsulation ppp-over-ether;
                pppoe-underlying-options { 
                    access-concentrator wlink;
                    duplicate-protection; 
                    dynamic-profile wlink; 
                    max-sessions 10;       
                    service-name-table nepal;

    protocols {                           
        pppoe {                           
            service-name-tables nepal {   
                service any {             
                    terminate;             
                    dynamic-profile wlink; 
                    max-sessions 100;

    access {                               
        group-profile test {               
            ppp {                         
                primary-dns 202.79.32.4;   
            }                             
        }                                 
        profile aaa {                     
            authentication-order radius;   
            radius {                       
                authentication-server 202.79.32.3;
                accounting-server 202.79.32.3;
            }                             
            radius-server {               
                202.79.32.3 {             
                    port 1650;             
                    secret “$9$vgNMx-db2gaU7-Y4”; ## SECRET-DATA

    #####################

    ERROR MESAGE ON INTERFACE

    wlink# run monitor traffic interface ge-1/1/1   
    verbose output suppressed, use <detail>or <extensive>for full protocol decode
    Address resolution is ON. Use <no-resolve>to avoid any reverse lookup delay.
    Address resolution timeout is 4s.
    Listening on ge-1/1/1, capture size 96 bytes

    10:57:41.171442  In PPPoE PADI [Service-Name] [Host-Uniq UTF8]
    10:57:41.173270 Out PPPoE PADO [AC-Name “wlink”] [Host-Uniq UTF8] [Service-Name] [AC-Cookie UTF8]
    10:57:41.173691  In PPPoE PADR [Service-Name] [Host-Uniq UTF8] [AC-Cookie UTF8]
    10:57:41.337897 Out PPPoE PADS [AC-System-Error “No resources”] [Host-Uniq UTF8]
    10:57:46.173541  In PPPoE PADR [Service-Name] [Host-Uniq UTF8] [AC-Cookie UTF8]
    10:57:46.286110 Out PPPoE PADS [AC-System-Error “No resources”] [Host-Uniq UTF8]
    10:57:51.173643  In PPPoE PADR [Service-Name] [Host-Uniq UTF8] [AC-Cookie UTF8]
    10:57:51.335314 Out PPPoE PADS [AC-System-Error “No resources”] [Host-Uniq UTF8]
    10:57:56.173718  In PPPoE PADR [Service-Name] [Host-Uniq UTF8] [AC-Cookie UTF8]
    10:57:56.283531 Out PPPoE PADS [AC-System-Error “No resources”] [Host-Uniq UTF8]

    #################################

    PLEASE SUGGEST ABOUT MY CONFIGURATION AND ERROR MESSAGAE HOW CAN I SOLVE THIS PROBLEM AND USER GET CONNECT.

    THANKS</no-resolve></extensive></detail>


 

47
Online

38.4k
Users

12.7k
Topics

44.5k
Posts