How to create a new policy DIP



  • Hi all !

    I’m a begginer on ISG 2000 config ;
    I had a big trouble when creating a new DIP policy , on ISG 2000 ,  using :  set dip id command or even using NUI .

    Please help for SSH synthaxe or NUI steps ( for example Policy –-------Policies -------- from zone — to zone  --------  Edit -------Advanced …)

    John



  • Hi Guys !

    Please some one can help in procedure of restoring GGSN 2009 disk partitions ? i have an  USB backup datas

    John



  • No worries John…



  • O and  thanks !
    John



  • You can create and extended DIP if the Firewall is complaining for IP range.

    Check the below link for more information.

    http://kb.juniper.net/InfoCenter/index?page=content&id=KB4371



  • In other word :

    I have the following configured dips :

    BZGIFW:BZGIFW01(M)-> get dip
    Dip Id  Dip Low          Dip High        Interface      Attribute  Usage
      4    82.206.129.1    82.206.129.1    ethernet3/2.432  port-xlate  n/a
      5    82.206.129.2    82.206.129.2    ethernet3/2.432  port-xlate  n/a
      6    82.206.129.4    82.206.129.4    ethernet3/2.432  port-xlate  n/a
      7    41.194.74.133    41.194.74.133    ethernet3/2.432  port-xlate  n/a
      8    41.223.88.65    41.223.88.65    ethernet3/2.432  port-xlate  n/a
    Port-xlated dip stickness off

    And just want to add a new dip Id 9 , with Ip  41.223.87.65  , the command is failling while  ethernet3/2.432  is already in the same subnet (/32) as the one i want to put this new dip , folling is the print out  :

    BZGIFW:BZGIFW01(M)-> set interface ethernet3/2.432 dip 9  41.223.87.33 255.255.255.240

    Dip 41.223.87.33 ~ 255.255.255.240  not in the same subnet as 10.9.0.244 (255.255.255.240) !

    Please help !!!
    John


 

29
Online

38.4k
Users

12.7k
Topics

44.5k
Posts