LSP forwarding problem
odogorshom last edited by
I have configured an explicet route LSP, it came up normally and when I use the command
show mpls lsp name <name>detail
I see the state is up and the RRO is correct
the routes of the VPNs are installed correctly in the VPN routing table and the next-hop is the lsp, the routes are present in the forwaring table of the VPN as well (checked in the two sites) but the problem the traffic is not going between the two sites.
Each site has 2 routers, the first site is 2 M10i Junos 7.6 R1.9 and the second site is 2 M7i Junos 7.5 R1.12
I have 1 E1s between each sites and GE between the routers in the same site.
The strange thing is that when I change the LSP ERO to go through the other router is the same site and then the other router in the other site the traffic goes normally.
Has anyone of you has any idea or faced such a problem please reply.
adisubrata last edited by
Can you draw the detail diagram?