(Greenbow) VPN client questions to connect to netscreen



  • I downloaded the Greenbow VPN client and followed the instructions in this doc.

    http://www.thegreenbow.com/doc/tgbvpn_cg_NetscreenNS5GT_en.pdf

    Steps 2.1 to 2.4 are straightforward, but not sure what to do at step 2.5
    These routes area already in place at the moment

    1. IP 0.0.0.0/0  Gateway 62.xx.xx.1  Interface: ethernet3 (untrust)  Protocol S, Metric 1

    2. IP 192.168.0.0/18  Gateway 0.0.0.0  Interface: ethernet1 (trust)  Protocol C, Metric 0

    3. IP 62.xx.xx.0/24 Gateteway 0.0.0.0  Interface: ethernet3 (untrust)  Protocol C, Metric 0

    Step 2.5 requires a LAN virtual route
    IP 0.0.0.0/0  Gateway 62.xx.xx.??  Interface: ethernet3 untrust  Metric 1

    would this conflict with the route 1) above ?
    Also what should the gateway ip be ?

    62.xx.xx.1 = the gateway IP
    62.xx.xx.5 = the Firewall IP
    62.xx.xx.10 = the server I want to access



  • Yes, that will create a conflict if you already have a default route established. You should be able to skip that step.


 

31
Online

38.4k
Users

12.7k
Topics

44.5k
Posts